F940 Got to Epson LX 300 + II printer pin confiuration

i have F 940 Got Hmi and epson printer connected to via LPT port. Now the wire form connector of the printer side has been dismantled and i am unable to find the correct pin configuration. Can anybody please help me in pin out of the printer

regards

http://dl.mitsubishielectric.com/dl/fa/document/manual/got/jy992d94801/jy992d94801f.pdf

https://allpinouts.org/pinouts/cables/serial/epson-serial-rs-232-cable-db9-to-db25/

HMI --- Printer Serial
RXD 4 --- 2 RXD
TXD 2 --- 3 TXD
DTR 3 --- 6 DTR
Ground 10 --- 7 SG
DSR 5 --- 20 DSR

Printer Side - jumper Pin 4 --- Pin 5
HMI Side - jumper Pin 6 --- Pin 7

This configuration should work for your serial printer.
Regards,