Siemens Guru's - plz help Convert STL to Lad

poormonkey · Jan 4, 2017

I need some assistance to any Siemens Gurus' who can help me convert the following from STL to Lad. I have tried all the old tricks I can remember from along time ago, but in Step 7 V13, I can't seem to get it to convert STL to FBD or LAD I read some where in the forum that this isn't possible any more. Thanks for the help...

A "MachineOptions_DB".SECOND_REJECT_ENB;
A(;
O "Faults_DB".VTPG_FLT_REJECT_VER;
O;
A "MachineOptions_DB".SECOND_REJECT_FAULT;
A "MACH_RUN";
A(;
L "MachineOptions_DB".SEC_REJ_PITCHES;
L 0;
>I;
);
A(;
L "MachineOptions_DB".REJ_PITCHES_ACCUM;
L "MachineOptions_DB".SEC_REJ_PITCHES;
<=I;
);
);
= %L6.0;
A %L6.0;
A(;
L %DB1.DBB1;
L 0;
==I;
);
= "SEC_REJ_BLOW1";
A %L6.0;
A(;
L "MachineOptions_DB".REJ_PITCHES_ACCUM;
L "MachineOptions_DB".SEC_REJ_PITCHES;
>I;
);
R "MachineOptions_DB".SECOND_REJECT_FAULT;

L D[AR2P#0.0] · Jan 4, 2017

Here's the ladder. Replace my M flags with your symbols.

L D[AR2P#0.0] · Jan 4, 2017

Here's the STL view:

Code:

      A     M      0.0
      A(    
      O     M      0.1
      O     
      A     M      0.2
      A     M      0.3
      A(    
      L     MW    10
      L     0
      >I    
      )     
      A(    
      L     MW    12
      L     MW    14
      <=I   
      )     
      )     
      =     L      8.0

      A     L      8.0
      A(    
      L     DB1.DBB    1
      L     0
      ==I   
      )     
      =     M      0.5
      A     L      8.0
      A(    
      L     MW    16
      L     MW    18
      >I    
      )     
      R     M      0.6

poormonkey · Jan 4, 2017

thank you....

fredz0003 · Feb 10, 2017

Poormonkey just fyi, when you have multiple outputs in one network, tia portal won't let you convert from stl to ladder.

If you copy and paste one output per network, it should be able to convert.
Below is one network:

Code:

      A     M      0.0
      A(    
      O     M      0.1
      O     
      A     M      0.2
      A     M      0.3
      A(    
      L     MW    10
      L     0
      >I    
      )     
      A(    
      L     MW    12
      L     MW    14
      <=I   
      )     
      )     
      =     L      8.0

And below is another network:

Code:

      A     L      8.0
      A(    
      L     DB1.DBB    1
      L     0
      ==I   
      )     
      =     M      0.5

Last one:

Code:

      A     L      8.0
      A(    
      L     MW    16
      L     MW    18
      >I    
      )     
      R     M      0.6

Anyways give it a try if you have a chance, this is what I used to do in my old days when I couldn't read stl, nowadays it all looks the same in my eyes. I think is better to show you why is not converting, rather than just converting for you with no explanation

Siemens Guru's - plz help Convert STL to Lad

poormonkey

Member

L D[AR2P#0.0]

Lifetime Supporting Member

L D[AR2P#0.0]

Lifetime Supporting Member

poormonkey

Member

fredz0003

Member

Similar Topics