dividezero Member D Join Date Jan 2017 Location Bangalore Posts 1 Jan 5, 2017 #1 Hi, I am trying to upload the program from the PLC to the PC using the Winproladder software. When I click the On-line under PLC, the following error is displayed (png attached) Does anyone know why I might be getting this error. Thank you
Hi, I am trying to upload the program from the PLC to the PC using the Winproladder software. When I click the On-line under PLC, the following error is displayed (png attached) Does anyone know why I might be getting this error. Thank you
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Jan 5, 2017 #2 http://www.multiprojekt.pl/ftp/fatek_sterowniki_plc/software/winproladder/winproladder_EN.pdf It looks like a security setting issue. Look at the above manual: 11.2 Program Security Settings Hope this helps you out. Regards,
http://www.multiprojekt.pl/ftp/fatek_sterowniki_plc/software/winproladder/winproladder_EN.pdf It looks like a security setting issue. Look at the above manual: 11.2 Program Security Settings Hope this helps you out. Regards,