gustavo_dias
Member
Hi all,
For communicate a S7-200 with my SCADA system I need to do a Data block. My question is, In SCADA System I need to write values in M areas, for example, M0.0. How can I do it?
P.S.: I already move bytes Mb0 to vb0, etc.
For communicate a S7-200 with my SCADA system I need to do a Data block. My question is, In SCADA System I need to write values in M areas, for example, M0.0. How can I do it?
P.S.: I already move bytes Mb0 to vb0, etc.
