Ethernet to CAN bus

tarik1978

Member
T
Join Date
Mar 2010
Location
casablanca
Posts
716
We plan to upgrade the plc of a blower machine to compactlogix (plc not yet defined)
This machine has a siemens simodrive 611u with can bus for communication to the plc.
Should the anybus communicator do the trick, or there's better solution?
Thanks for your thoughts:confused::confused::confused:
 

Similar Topics

theColonel26
Electronic Circuit Breakers, With 0V Terminals built-in and Fieldbus (IO-LINK, MODBUS TCP, EtherNet/IP?
Does anyone have any recommendations for Electronic Circuit Breakers with 0V Terminals built-in and Fieldbus (IO-LINK, MODBUS TCP, EtherNet/IP?)...
Replies
2
Views
186
theColonel26
theColonel26
A
CODESYS EtherNet/IP Scnner: "The bus is not running..." issue
Hello. I need to connect an EtherNet/IP adapter to CODESYS RTE. I have confirmed that the adapter works with Rockwell Logix, and not only the...
Replies
7
Views
2,389
mikas_m
M
D
Modbus to Ethernet
What's the cheapest way to go from modbus rtu rs485 to Ethernet IP or TCP. I've got some power transducers I'd like to read some modbus addresses...
Replies
14
Views
1,332
KirkC
K
S
Gateway between Ethernet/IP and Modbus TCP
Hello, Sorry, my knowledge of communication protocol is limited, so thank you in advance for your answer. My question; I want to get 5 values...
Replies
2
Views
853
Contr_Conn
Contr_Conn
S
Modbus TCP or Ethernet/IP remote I/O options
Hi All, Trying to help a client who has a project that was started with Schneider STB remote I/O, but they are still waiting on the STBNIP2212...
Replies
11
Views
1,895
Saffa
S
Back
Top Bottom