Mismatch in the motor data in sinamics and its effect

panthripu

Member
P
Join Date
Mar 2004
Posts
228
Hi
We have one system where we use sinamics drive.The drive has been configured for 60Hz motor(1800rpm) and our supply frequency is 60Hz. Now due to some reasons we wish to connect motor designed with 50Hz(1500rpm) ,without changing parameter in the drive.
My question,is what problems we are going to face?
 

Similar Topics

N
Honeywell HMIWeb Display Builder - error script type mismatch
Hello, I am learning to create shapes and VB Scripts in HMIWeb Display Builder. I wanted to change color of my rounded rectangle by script. I...
Replies
0
Views
103
Nat09817
N
J
Beckhoff hardware mismatch
hello, I am using Beckhoff with TwinCAT3 and when I change or add some new hardware or for any reason, there is a mismatch in the real hardware vs...
Replies
1
Views
125
AlfredoQuintero
A
P
RS5000 Error 16@0130 mismatch. 1756-IF16
Hi Guys, Hoping that someone could please confirm if the 1756-IF16/B is/isn't compatible with the 1756-L1 5550 processor(13.24). I'm sure I...
Replies
2
Views
102
priceymike
P
0
A1000 and EPIC David standard speed mismatch
Hello, I'm am engineer for a plastic manufacturer. We swapped out a oem motor with one of equivalent nameplate stats made by marathon on our roll...
Replies
3
Views
482
0nezer0
0
D
Error 8097: Controller Error - CPU Slot Mismatch
Error 8097: Controller Error - CPU slot mismatch [0x05][0x46] [0xC00C0001] I got that error above when I was trying to download my programming to...
Replies
2
Views
411
Steve Bailey
Steve Bailey
Back
Top Bottom