TMC470 Communication
- Thread starter monach
- Start date
jstolaruk
Lifetime Supporting Member
Telesis doesn't have a built in Ethernet-IP adapter, I believe they use a Anybus adapter serial adapter or some other proprietary widget.
Try this for the IP settings:
Data-SINT
Input Instance 101 size 118
Output Instance 111 size 110
Configuration Instance 128 size 0
There is a pdf manual named "Ethernet IP Manual 70687B" that should be available on the web.
If you're in SE MI call Phil Theaker at PTR Sales in Walled Lake, he can steer you to what you need.
Try this for the IP settings:
Data-SINT
Input Instance 101 size 118
Output Instance 111 size 110
Configuration Instance 128 size 0
There is a pdf manual named "Ethernet IP Manual 70687B" that should be available on the web.
If you're in SE MI call Phil Theaker at PTR Sales in Walled Lake, he can steer you to what you need.
Similar Topics
Good morning. I have been working on integrating a Telesis TMC470 using their #77918 ethernet adapter. I can get a string to send, but it is not...
Any one have any experience getting a Micrologix 1400 to communicate with a
Telesis TMC470 Printer? If so what communication protocol did you use...
Hello Everyone,
I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...