OT: Sensor recommendation

theripley

Member
theripley
Join Date
Jul 2008
Location
laguna
Posts
545
Hi.

This is not a plc-related thread, but I would need to know what type of sensor to use with a manual press (see pic attached). I have to know if the operator used required amount of force during manual pressing.

Please advise.

61236-2721103.jpg
 

Similar Topics

Phil Buchanan
Low Water Level Sensor Recommendation
Looking for a low water sensor for a critical application. This is a large water bath with dirty water that has some surface ripples and movement...
Replies
9
Views
5,067
Geoff White
G
RonJohn
EQ tank temperature & level sensor recommendation
I was wondering if any of you folks with waste water experience could help me out. We are adding an Equalization tank at our plant's WWTP. The...
Replies
7
Views
6,414
RonJohn
RonJohn
The Plc Kid
Oil Flow Sensor Recommendation
I am looking for a OIl flow sensor to verify oil flow in a gearbox befor allowing the gearbox to run. So I am not really trying to measure the...
Replies
14
Views
4,789
dahnuguy
D
V
Micro850 + Sensor: 1 Axis can not move in negative direction when working together with sensor
Hi everyone, I am working with micro850, a proximity sensor (FOTEK, PL-05P) and a 3DOF serial arm robot. I use MC_MoveRelative to control the...
Replies
1
Views
31
vhs
V
P
Photosensor wiring question
Maybe a stretch to call this a PLC question, but it does connect to a PLC input. I have two German switches: Sick WL9LG-3P2232 And a...
Replies
0
Views
103
PiperJohn
P
Back
Top Bottom