GE PLC CPE305 USB problem
- Thread starter morty
- Start date
dYoast
Lifetime Supporting Member
IC695CPE305 and USB
The IPI (Datasheet) details the USB operation also.
Be aware that putting the Project onto a USB drive is only useful for placing it back to this or another CPU as for some unknown reason Proficy ME does not support the format used here, unless maybw the new version 9.5 of PME does.
The IPI (Datasheet) details the USB operation also.
Be aware that putting the Project onto a USB drive is only useful for placing it back to this or another CPU as for some unknown reason Proficy ME does not support the format used here, unless maybw the new version 9.5 of PME does.
Similar Topics
I have a problem loading the first configuration and logic to a new CPE305.
This is about the 20th CPE305 I have setup.
I have never had a big...
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Hi All,
Someone at work has put a PLC system on my desk, that's just been taken off an idle production line.
He said "It's an S7 PLC. We don't...
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...