Adding an additional shunt module to a 1394

rootboy

Lifetime Supporting Member
rootboy
Join Date
Jan 2004
Location
Tennessee
Posts
1,375
Hi guys,

Is it possible to add additional shunt modules (braking resistors) to a 1394 system?

We have one on the Z axis now, but the weight of the hardware blows the internal fuse in the 3600w Shunt Module from time-to-time.


Thanks!
 

Similar Topics

0
Adding additional memory?
Hi, I have encountered a situation where the PLC ( Micrologix 1500 LRP) has reached its memory limit, so i have done some research and found out...
Replies
3
Views
2,111
jstolaruk
J
J
SLC5/04 Fault when adding additional I/O Cards
I have (2) 1746 racks with a SLC5/04 and (8) I/O cards in each. When I attempt to add additional cards I get a fault and cannot see the 2nd rack...
Replies
6
Views
3,131
Controls_Engineer79
Controls_Engineer79
S
ControNET - Adding an additional I/O Module to a Rack that has already been scheduled
Good Morning, Let me start by stating that I do not know a great deal about all the intricacies of ControlNet, but I have read and have been...
Replies
3
Views
9,550
Contr_Conn
Contr_Conn
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
53
celso3093
C
B
Adding IB16S to the IO configuration - Logix Designer v31
Hello, Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...
Replies
3
Views
134
robertmee
R
Back
Top Bottom