Siemens S7 300 replacement cases

jb___

Member
J
Join Date
Feb 2017
Location
Yorkshire
Posts
1
Hello all!
This is my first post. Been looking round the site and seems a great source of information!
I have an S7 300 PLC which has two cards with the top mounting tabs broken off due to poor installation. I have been searching for a place to purchase the rear cases but have come up dry.
Just wondering if anyone knows where and in fact if I can get hold of them?

Thanks in advance
 

Similar Topics

M
Siemens S7 300 PLC replacement issue
Hello. There is a problem with Siemens S7 300. We got a replacement PLC but it does not run the program from the MMC. The new PLC is dated 2011...
Replies
3
Views
686
Rob...
R
S
Siemens S7-300 Replacement procedure
Hi all, Good day. I have experienced in Allen bradley but i'm very new to the siemens plC & sorru for asked basics. in my plant one of the...
Replies
2
Views
1,007
RVaughan
RVaughan
ceilingwalker
ESA HMI and Siemens S7-300 question
Hello all. I have an ESA HMI that is connected to a Simatic S7-300 (CPU312). I have uploaded the program from the PLC which is written with Step7...
Replies
6
Views
1,439
ceilingwalker
ceilingwalker
M
Help with IP address on a Siemens Simatic S7300
Hi to all, Our company does not usually use Siemens PLCs, but have a press with one in it. We are trying to change the IP address in our Simatic...
Replies
2
Views
1,066
Maintenance Man
M
A
Siemens S7-300 not going into run mode
G'day guys, I am setting up a s7-300 as a test rig for the workshop and when I downloaded the PLC is not going into run mode, I keep getting a...
2 3
Replies
35
Views
5,213
advanced.eic
A
Back
Top Bottom