Steve Etter
Lifetime Supporting Member + Moderator
On the Red Lion Graphite panels there are three button/indicators at the bottom below the screen. The left-most of these is triangular shaped and is, by default, used to indicate fault conditions. That is also the way I want to continue using it.
The problem I have is that it flashes any time anything is on the alarm page regardless of whether it's acknowledged, cleared, or active. I'd like to make it stop flashing without having to clear everything off of the page (we like to have it as a running record of what has happened).
Does anyone know a method for setting this so that only "active" alarms cause it to flash?
The problem I have is that it flashes any time anything is on the alarm page regardless of whether it's acknowledged, cleared, or active. I'd like to make it stop flashing without having to clear everything off of the page (we like to have it as a running record of what has happened).
Does anyone know a method for setting this so that only "active" alarms cause it to flash?