I lost a main board today that holds all parameters for this very old drive. I got the drive back to where it can be started and ran, but I lost my jog capability. I have tried working with the communication parameters and I think i have them back to where they were. The inverter ID is finding that I'm not sure about our how to reference on the plc side. Any help with this drive would be great. Thanks.
TO130 Toshiba drives with Rio, using logix 5000
- Thread starter remullis
- Start date
Similar Topics
Hi, I have two Toshiba G3 Tosvert-130, one of them I can see monitoring mode, I can control with the LCD display, recently I changed the presets...
I inherited a system with the Micrologix 1500 talking to 8 VFDs using Modbus RTU protocol. One of the VFDs was replaced with a Toshiba VF AS1...
Another software thread!
We have a Toshiba EX100 that's just been working away quietly in a panel for 20 years, never causing a problem to...
Hi,
Any body had success to change parameters in between a Toshiba Inverter VF-S11 using a Red Lion any series (mine is K304), and MODBUS RTU...
So far, the Toshiba drives seem to be the best out there.
I wish their software was a little better though.