OT: Dev board
- Thread starter Hundikoer
- Start date
You can order it from TI site:
http://www.ti.com/tool/tmdscsk388?keyMatch=TMDSCSK388&tisearch=Search-EN-Everything
http://www.ti.com/tool/tmdscsk388?keyMatch=TMDSCSK388&tisearch=Search-EN-Everything
Forgot to mention earlier that www.ti.com site does not allow to order it as part of the Dev Board is out of stock...
kolyur
Lifetime Supporting Member + Moderator
It's not your exact part number but Mouser has one development board for the DM388 in stock:
http://www.mouser.com/ProductDetail/Texas-Instruments/TMDXEVM388/
http://www.mouser.com/ProductDetail/Texas-Instruments/TMDXEVM388/
Many thanks!
That is $2k board with 4 weeks waiting time. Too expensive for the job and too long waiting time as well
I am trying to find a used one as rather often you finalise the project with Dev Board and then it just collects the dust - have few here doing it...
That is $2k board with 4 weeks waiting time. Too expensive for the job and too long waiting time as well
I am trying to find a used one as rather often you finalise the project with Dev Board and then it just collects the dust - have few here doing it...
Similar Topics
I can download an program into the target board(M4012、M4500),but could not upload the program from the target board except datas.There is no...
Hello All
I have a Mitsubishi FX2nc-32MT-DSS PLC that the battery went down and lost the program. So I need to reload it but I don’t have the...
I am trying to set up a Dev address in a ProSoft MCM module. This module is acting as the master. The Modbus of the slave address is 7566 in a...
Seems odd that you can make a symbol and place many of them but if the text on a button and or elsewhere in the symbol comes from a Custom...
Hi, complete novice here. GXDeveloper:
I work in a test facility controlled by Q-series PLC.
I want to do some self-training on ladder logic...