abbastukanov
Member
Hello,
We are using Lenze 8400 Topline drive for driving mcs09h41 servo motor in our project. in project we have 2 position :0 and 180 degree rotation. when we start to rotate it its speed is very low due to acceleration. acceleration is increasing slowly then stop . if we repeat doing rotating servo from pos. 1 to 2 or reverse several times its acceleration and speed increase. in my opinion it is because of temperature of motor. firstly motor temp. is low after working 2 min. it rotates fastly. i changed all parameters it did not help. what is your suggestion to solve this problem.
thanks for your answers.
We are using Lenze 8400 Topline drive for driving mcs09h41 servo motor in our project. in project we have 2 position :0 and 180 degree rotation. when we start to rotate it its speed is very low due to acceleration. acceleration is increasing slowly then stop . if we repeat doing rotating servo from pos. 1 to 2 or reverse several times its acceleration and speed increase. in my opinion it is because of temperature of motor. firstly motor temp. is low after working 2 min. it rotates fastly. i changed all parameters it did not help. what is your suggestion to solve this problem.
thanks for your answers.