carnado2008
Member
Hi everyone i am new in PLC...i just want to ask how i can get tutorial about how to create daily timer to 'ON' a single phase motor. My PLC is OMRON CP1E. TQ.
New In PLC
- Thread starter carnado2008
- Start date
http://accautomation.ca/omron-cp1h-timers/
The above thread will help you out.
If you go to the Programming menu and then PLC Basics you will find a series on the CP1H PLC from Omron. This is similar to your CP1E.
Regards,
The above thread will help you out.
If you go to the Programming menu and then PLC Basics you will find a series on the CP1H PLC from Omron. This is similar to your CP1E.
Regards,
Similar Topics
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Hi All,
Someone at work has put a PLC system on my desk, that's just been taken off an idle production line.
He said "It's an S7 PLC. We don't...
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...
HOW to communicate with OPTIX and Mitsubishi's Q Series PLC?? PLEASE HELP ME