Configuring S7-IM463-2

fribeiro

Member
F
Join Date
Dec 2003
Location
Almada
Posts
40
Hello guys,

I am close to convert a S5 to S7 system and i will use one IM463-2 and three S5-IM318 and i need to be prepared and clean out of my mind all doubts. So i need to know what should i configure in Input/output addresses fields of IM463-2? Is it the address of each module inserted in each expansion rack, or is it the address of each IM318?

Thanks,

im463-2.jpg
 

Similar Topics

T
HMS Anybus Bolt II Configuring in Logix
Hello all and happy Friday, I'm curious if anyone here has experience sending data over an Anybus Bolt II (HMS AWB6001-A) using a Compact Logix...
Replies
4
Views
765
EastSideSquirrel
E
D
Configuring OPTO22 IO in codesys
Hello everyone, I am looking for an easier way to configure all my IO for an OPTO22 PLC. I am developing in Codesys I have a GRV-EPIC-PR1 with a...
Replies
0
Views
585
dduquette2141
D
D
Configuring Modbus SST-SR4-CLX-RLL Scanner
Greetings to all. We have SST-SR4-CLX-RLL (Molex Modbus module) in remote backplane. The remote backplane, containing SST-SR4-CLX-RLL module, is...
Replies
0
Views
651
desa
D
H
Configuring m221 and wecon HMI modbus RTU
disclaimer- 1,no one in their right mind would pick this configuration but I want to try and get it working. 2, my MB knowledge is sketchy at...
Replies
5
Views
1,138
jschulze
J
W
Configuring redundant ethernet cards
When configuring redundant ethernet cards, will the mac address change along with the IP address. A friend is having problems with IP security...
Replies
3
Views
1,256
Ken Roach
Ken Roach
Back
Top Bottom