Setup Kepserver with Foxrtu station or isagraf

Mike_ant

Member
Join Date
May 2017
Location
USA
Posts
13
hello guys
i would love to read data from a foxboro rtu sdc2200 (i have all softs installed on same virtual machine )
i'm using kepserverex as opc server and no success until now
i'm able to read data from other softs like excel , plcs, tristation 1131 , but couldn't with foxrtu station or isagraf 5.13
i don't know i need to install a driver or something similar in order to make it possible to simulate
see images
http://imgur.com/a/7Wgy3

thanks in advance
 
http://www.plctalk.net/qanda/showthread.php?t=110156

Let's reset your question, What exactly is your setup?

Don't assume anything about what we know about about setup.

- How are you able to read data from the RTU, what physical and protocol path?
- Is the Kepware you are using licensed for DNP and is it in Demo mode only?
- You said can't read from FoxRTU or Isagraf, but able to read from other devices and software so what is the data-path, who is the master and who is the slave? Show us the diagram.
 
Hi again ,
regarding softs i could read data from (Excell via DDE client ) and tristation 1131 via Triconext ethernet

when it comes to Foxrtu station you can check pictures in previous topic and these ones
http://imgur.com/a/jfFXw

when it comes to Slave ip and Port on foxrtu station there is no configuration on how to set up a port number

that version of kepserver is a demo

all what i want to achieve is simulation ( everything is installed on same virtual machine )
thanks in advance
 
Last edited:

Similar Topics

I want to establish a Profinet network in my production plant to connect multiple devices, including a PLC, HMI, and multiple Profinet-based...
Replies
19
Views
552
Hi everyone, I am currently working on a AB 193-EDN and i am trying to figure out this "Average %FLA", it keeps showing 70-75 but my clamp meter...
Replies
1
Views
83
Word of warning. I had issues with a 5069-AENTR not appearing in IO selection. After downloading the latest version 40 AOP, still didn't appear...
Replies
0
Views
123
Hi guys, I've got problem about my Alarms services (i think), that happen after installed Visual Studio. I did a few things like, Repair : Studio...
Replies
3
Views
125
Hi all. First thank to Phil for the update, looks great so far! This is the situation. I'm mostly working from home since the pandemic when I'm...
Replies
8
Views
285
Back
Top Bottom