Connecting a poweflex 753 to a panelview plus 6 1250

caiothe

Member
C
Join Date
Jun 2017
Location
SĂŁo Paulo
Posts
1
is it possible to comunicate a powerflex 753 (ccw) using ethernet 20-750-ENETR card to a panelview plus 6 1250 (factorytalk view studio me) directly? without a plc, if it's possible, how its done? I tryed to create a shortcut, but no success so far, and i couldn't find any help on the knowledge base...


🤞🏻
 

Similar Topics

K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
24
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
164
arpus4KM
A
M
Connecting Different controllers (brands) with same I/O devices - Demo Station Design
Hi, I want to build a demo station to test devices and programs and I need some help with it. I want to connect GuardLogix, Piltzmulti and...
Replies
1
Views
134
JeffKiper
JeffKiper
N
Connecting to the PLC or 1756-ENBT over USB
please using the usb can i assign any ip address that i want ?
Replies
4
Views
144
geniusintraining
geniusintraining
A
Output is nc when connecting with wire.
Hi everyone, I need some help I new with omron plc. I using plc CP1L. When I do the program it's good and the plc is function as program. But when...
Replies
1
Views
83
Liam Moran
Liam Moran
Back
Top Bottom