HART Communication

Hi every one
In Previous system HART COMMUNICATIONS MODULE, MTL P/N: HTP-SC16S
is used for updating the HART Parameters by using INSTRUMENT MANAGEMENT SOFTWARE
In new system we are offering Control logix hardware and we do not want to offer above module for updating parameter.If we add 1756-IF16H module for updating the configurations for field devices which are communicating on HART Protocol.
1756-IF16H is compatible to Previous

HART COMMUNICATIONS MODULE, MTL P/N: HTP-SC16S

I have used a 1756-IF8H alongside factorytalk assetcenter for device management and parameter modifications over HART, I would assume it would work with other software but don't quote me on that.

http://literature.rockwellautomation.com/idc/groups/literature/documents/rn/1756-rn646_-en-p.pdf

also if you need IS protection you will need to add IS barriers with HART pass-through functionality