FUJI MICREX CPU problem

Eslam_Saeed

Member
E
Join Date
Dec 2015
Location
cairo
Posts
1
i have a machine with PLC MICREX SPH300( NP1PS-117R) the battery is out of service and when the power shut and on again the program is not found and the cpu give alarm led and run light disappear,
i already have the program in a SD card but when i try to load it again the CPU didn't respond and alarm led is on.
so can any one tell me what is the problem?
if i need to change the cpu or any thing else
 

Similar Topics

M
Fuji Micrex-F Cpu F70s
I have a Fuji Micrex-F cpu F70s installed in my machines. The problem I am facing is that I am getting an alarm1 and alarm2 indication ON. Can...
Replies
0
Views
3,727
mnsrulz
M
S
Pls. introduce Programming cable for FUJI MICREX-F
i want the cable to connect PLC FUJI MIREX- F Who ever used, and pls. tell me how i order it , or pls. tell me the part number of the cable thank you
Replies
1
Views
3,930
ues_egypt
U
M
fuji micrex-f communication problem
Hello everyone. We have a problem with a micrex-f plc which is used in AKYAMA printing machine, the error message is about T-link communication...
Replies
0
Views
3,584
mons6262
M
G
Fuji Micrex F50 PLC
I have a machine with 3 working fuju PLC's FPF56X-A10,FTF32X-N and FTF56X-A10. As the PLC's are obsolete I would like to download each,save the...
Replies
0
Views
2,352
gchild
G
A
Fuji Micrex-F (F70) and UG031-T HMI Problem
Good day, I would like to seek help for my problem with a Fuji PLC and HMI. I have a project proposal about migrating Fuji PLC (Micrex-F "F70")...
Replies
0
Views
5,102
Andreik
A
Back
Top Bottom