john_drive
Member
I'm Data Recovery specialist. I'm Just recovered almost all data from the PC where after Big Crash 2 files from PL7 Micro 1.5 installation were physically overwritten by the trash. Unfortunately this is the only PC on the plant where PL7 Micro were located (they even have no backups or original installation packages - nothing at all since 1996!) The program doesn't work without these 2 files (Win 3.1 DLLs).
"PC/PLC specialist" on the plant said me that they coludn't ask for support from their equipement/software vendor/reseller because of...He was located in the South Africa and he is closed his office a few years ago :-(
Please anyone help me in this situation.
Required files:
TBPRO3W.DLL - size=378320bytes ; file date/time=nov 9, 1994 10:41:16
ANAMMIX.DLL - size=385005bytes ; file date/time=aug 20, 1996 10:55:08
from
Schneider Automation PL7 Micro v1.5
Thank you in advice
"PC/PLC specialist" on the plant said me that they coludn't ask for support from their equipement/software vendor/reseller because of...He was located in the South Africa and he is closed his office a few years ago :-(
Please anyone help me in this situation.
Required files:
TBPRO3W.DLL - size=378320bytes ; file date/time=nov 9, 1994 10:41:16
ANAMMIX.DLL - size=385005bytes ; file date/time=aug 20, 1996 10:55:08
from
Schneider Automation PL7 Micro v1.5
Thank you in advice