SIMATIC NET, Station Configuration Editor

luleem · Dec 20, 2017

Dear Everybody

I try to use Station Configuration Editor but i have some problem.

1.When start Station Configuration Editor, loading tab is still 7%
until Error message appear as the picture below

2.At Components tab, all of button are disabled as picture below.

3. At Diagnostics tab, message show as picture below.

Please recommend me about how should I do.
Thank you

sigmadelta · Dec 21, 2017

Please try posting your pictures again, they are not seen, or describe your errors/pictures in details.

luleem · Dec 21, 2017

i'm so sorry
picture in attach files

Thank you

JesperMP · Dec 21, 2017

Not sure what goes wrong. But it is something fundamental since there is a service that fails to load.
I would reinstall Simatic Net.

luleem · Dec 21, 2017

I reinstall in many time but it still happpen.

sigmadelta · Dec 21, 2017

Which version of SIMATIC NET?

luleem · Dec 21, 2017

8.2 sp1

sigmadelta · Dec 21, 2017

Check in Windows Control Panel -> Administrative Tools -> Services and see if any obvious Simatic Net services are not started and post the list here,

sigmadelta · Dec 21, 2017

Also, are you an Administrator user on this computer?

luleem · Dec 21, 2017

Service List as Attached File

sigmadelta · Dec 21, 2017

Does the SIMATIC Net Configuration Server start if you right-click "Start"?

Lare · Dec 21, 2017

try unistalling and then installing setup with right click above, and select run as administrator

SIMATIC NET, Station Configuration Editor

luleem

Member

sigmadelta

Member

luleem

Member

JesperMP

Lifetime Supporting Member + Moderator

luleem

Member

sigmadelta

Member

luleem

Member

sigmadelta

Member

sigmadelta

Member

luleem

Member

sigmadelta

Member

Lare

Member

Similar Topics