fusing analog
- Thread starter timbo4255
- Start date
Rick Densing
Member
If the fuse is intact, the blown fuse stuff is shorted out, so I would expect no.
shoeman
Member
I haven't seen it do it to an analog, but I have seen it fool a discete input though. Enough current was flowing to cause a false reading.
Similar Topics
Utilizing the Contrologix 1756 platform analog input/output modules, I don't see any recommended fusing requirements in the AB books even though I...
Hi all,
I'm working on a safety circuit and had some question about fusing.
Incoming supply - 120V/15A
Power supply - PSL-24-060...
The cards have two internal 3.15A fuses, one for each group, and a 0.5A max current loading per point @ 60°C (140°F).
They also have a 5A surge...
I've just created a small program and saved it. Then I clicked on the 'Download to device' icon and this dialogue box appeared.
Do I need to...
Engineers and designers, question.
Do you typically fuse the PLC outputs ?
I see some that are fused and many that are not. I typically fuse...