Old Honeywell Software?

Anybody know what software is needed to connect/debug a Honeywell 9010-016C 9100E Logic Processor Controller? Looks pretty dang old.



I have a customer with a bunch of these which they would like a quote to replace, but would like support in the meantime.


Thanks,
-Brad

That is the OLD Honeywell Series 9000 software....late 1980s to early 1993 or so.
Those were actually "York" plcs (bought by Honeywell), pretty good in their day.

You will need Honeywell S9000 software to program...I think windows 3.1 or 3.3. You will also need "Gateway module" to connect to plc from HW S9000 software...whopping 9600 baud speed.
I assume your customer has this system?

You can also go in the "back door" with 623-60 plc software (DOS only).

Thanks for the reply Nathan, great info.


Any idea where the software could be procured? Nothing shows up on ebay, etc for HW S9000 s/w.


Also, is this the gateway module of which you spoke?
https://www.ebay.com/itm/USED-HONEY...240344&hash=item234c4f177c:g:LmsAAOSwpDdU8Oc5

Yes that is the gateway..


I used to have a copy of the software....I will have to dig thru my archives....no promises.
What was your customer using these PLCs for, did they have a Scada/HMI system communicating with them?

I found plc software manual...
Here is link to 623-60 software manual.
Maybe this will help you find software.
https://app.box.com/s/y0zp4xrvbuoaq0p2vuqglckyz7qom321