Ab To Mitsi

Hi
I am converting a A\B program for use on Mitsi can anyone help with the following questions
=1 I take it that B in A\B is the same as M in Mitsi.

=2 I have two S bits in A\B they are S:115 IN/IZATION BIT
and S:45 TIME BASE.

can anyone tell me the equivalant in Mitsi.
thanks delph

"I take it that B in A\B is the same as M in Mitsi"

No, "B" means Bradley and "M" means Mitsubishi... (only kidding!)

But really, you are correct that B and M are equivalent...

You can use M8002 to do the same thing as S:1/15 (first scan)

S:4/5 is simply a clock pulse. Someone else will chime in with details about the duty cycle of this particular bit (I always get confused with it). The Mitsubishi has 4 clock pulses...

M8011 - 10ms
M8012 - 100ms
M8013 - 1 sec
M8014 - 1 min

The AB program is probably just using this to flash a lamp, so M8013 can be used.

beerchug

-Eric