hi
plc: mitsubishi FX1N
i have to use fast counters and functions HCSCS/R, and i don't understand how counter (e.g. C254) works. this counter may count state changes on input x0/x1 (A-phase, B-phase). and singal X10 is used to enable count.
if i write:
---| X10 |---( C254 )
it generate error when i compile program
how can i force start counting?
plc: mitsubishi FX1N
i have to use fast counters and functions HCSCS/R, and i don't understand how counter (e.g. C254) works. this counter may count state changes on input x0/x1 (A-phase, B-phase). and singal X10 is used to enable count.
if i write:
---| X10 |---( C254 )
it generate error when i compile program
how can i force start counting?