Melsec + Scada

I´m searching for a scada prog. that can communicate with my melsec A3A serieel or with ethernet. Can anyone help me?

Have you tried Citect? Can communicate with most.

www.citect.com.

First thank you for the reply, but

This version of the software is fully functional with only the following limitation:
1) No networking
2) Runtime limited to 8 hours with virtual I/O or 15 minutes with physical I/O.

You need a key, and those are unfortunately the expensive for a home user.

You did not mention that you do not want to pay for the SCADA package. I do not know of any SCADA supplier that will give you a full working copy for nothing.

Would suggest you will probably have to roll your own.

If you have a Mitsubishi driver that has DDE, you can probably develop one in Excel.