chauhanrasikendra
Guest
C
What do u mean by 500mSecond/K Statement scan rate actually what is K in Siemens PLC.
Hello chauhanrasikendra ;
in this case, K stands for kilo, meaning a thousand (actually, a binary thousand, really 1024).
So "500mSecond/K Statement" translates to:
"500 millisecond per 1024 statements (or operations)".
It expresses a measure of CPU speed that allows comparision between different controllers.
Hope this helps,
Daniel Chartier
in this case, K stands for kilo, meaning a thousand (actually, a binary thousand, really 1024).
So "500mSecond/K Statement" translates to:
"500 millisecond per 1024 statements (or operations)".
It expresses a measure of CPU speed that allows comparision between different controllers.
Hope this helps,
Daniel Chartier
Similar Topics
Hello,
I have an issue where I want to simulate an Siemens HMI panel, through NAT connection to a PLC. I have the possibility through extended...
HI everyone,
i am new to Siemens plc programming and i am in need of some help.
yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Hello, good morning, I have been having two problems with the Tia Portal software.
The first is that I have installed it on my computer and...
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...