PLc and Motorola V66

TEOWK

Member
T
Join Date
Oct 2004
Location
Batu Pahat
Posts
38
I have a project to replace an existing GSM Modem with Motorola V66 for SMS messaging using PLC. Previously I use an RS 232 port to send AT command to dirve the GSM Modem. But now we are provided with a Motorola V.66 handset. Please advise thow can I communicate with this handset model to send out SMS. Thank you.
 

Similar Topics

S
Motorola Bar code scanner with Siemens PLC and HMI
I want to be able to scan in bar codes and display them on my Siemens MP 377 panel. I'm using an s7-315 PLC. Where would I start for configuring this?
Replies
1
Views
4,354
widelto
widelto
bluenoser337
Does Anyone Know Motorola PLC?
Does anyone out there know Motorola ACE3600 STS PLC programming?
Replies
5
Views
4,745
bluenoser337
bluenoser337
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
6
Views
122
drforsythe
D
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
177
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
36
Tecnolaundry
T
Back
Top Bottom