Battery-PLC

atatari

Member
Join Date
Sep 2002
Posts
92
I have a couple of CPUs which are my spare ones.
Do I have to disconnect the battery leads to keep the battery charged?

Thanks
 
If you want to save the batteries disconnect them.

On the shelve PLCS don't need battries. Think about removing them to prevent damage from leaks.
PLCS that need to have keep their memory should always be powered and not rely on batteries.
 

Similar Topics

Hi there! This is something so old and having machine with it....... Last time unit was powered around 3yr ago and it did not work since than...
Replies
5
Views
186
Hello friends, The battery of my omron plc goes low and need to replace with a new one. The original battery value is 3v exactly, while I've a...
Replies
5
Views
614
Hello, I am doing research project focused on the retrofit of a diesel locomotive into a hydrogen-fuel-cell-battery hybrid locomotive. The...
Replies
7
Views
510
At the moment on my application (S7-1212C), the PLC/HMI are showing the correct time, i.e. the displayed time matches the time of the clock on the...
Replies
10
Views
880
Hello Everyone, I have a Mitsubishi PLC FX3U According to Mitsubishi PLC manual we have to power off the plc and change the battery in 20...
Replies
2
Views
1,607
Back
Top Bottom