Common File Format

labingtone

Member
L
Join Date
Aug 2002
Location
Manila, Philippines
Posts
113
Dear All,

The DD files of FF has 3 files. The files with extension rrdd.ffo, rrdd.sym and XXXXXX.cff.

rr=device revision
dd=DD revision
XXXXXX=?

My question is about xxxxxx.cff(capability file). i dont know what is the description of the xxxxxx value and I can not chose the correct version of capability file to use for my Field device.


Many thanks,

Lovington Dela Cruz
 

Similar Topics

B
Ishida Multi Head Scales CCW-M-214- What are the common causes of faults ?
Good Afternoon , I'm sure there are many Ishida Muti-Head Weigh Systems . We have a Ishida CCW-M-214W Multi-Head system . We are...
Replies
1
Views
530
5618
5618
A
Query regarding common positive and common negative in a stepper driver
Hi, I am connecting an Autonics make stepper driver type, MD5-ND14 to a Kinco PLC (K205 series) this has a sourcing output which cannot be...
Replies
2
Views
1,115
arbj
A
S
Do PLCs run a common intermediate language under the hood?
I speculate that PLCs translate the language from programmers (e.g Ladder Logic, SFCs, Structured Text) into a common intermediate language...
2
Replies
15
Views
4,243
Thomas_v2
T
C
Powerflex 70 / HW OverCurrent Fault #12 - What is the common reason for this fault ?
Good Afternoon , I have a Powerflex 70 Drive . It faulted out with a #12 HW OverCurrent Fault . With your experience , what is the...
Replies
5
Views
7,679
Jarp2094
J
O
Control Panels & Digital Common
So I ran into something today that surprised and confused me. While troubleshooting a DC circuit I normally put one lead on a ground and probe...
Replies
6
Views
1,640
agdacanay77
A
Back
Top Bottom