Ken J
Member
Is there a way to view the average scan time while in RUN mode? I know the AB SLCs with RSLogix 500 had the capability.
S7-200 Scan Time....
- Thread starter Ken J
- Start date
Terry Woods
Member
- Join Date
- Apr 2002
- Posts
- 3,170
Scan Time info is kept in..
SMW22 = Last Scan Time
SMW24 = Minimum Scan Time
SMW26 = Maximum Scan Time
You can monitor these values on a status screen.
As far as having "average scan time"... you might want to give that a re-think.
Why would you want "average scan time"?
SMW22 = Last Scan Time
SMW24 = Minimum Scan Time
SMW26 = Maximum Scan Time
You can monitor these values on a status screen.
As far as having "average scan time"... you might want to give that a re-think.
Why would you want "average scan time"?
Similar Topics
Hi all
I'm converting an S7-200 program into S7-300.
There is a Word Increment command INC_W which takes in a VW address and puts it back into...
Hi guys,
I have several machines that are using the Micrologix 1200 with a Panelview 300 HMI which I would like to convert to a Micrologix...
Is it possible to have a set scan time in AB Micrologix 1200.
If so how do you do it?
Regards
I have an application where I need to be especially careful on minimizing my scan times.
I wrote a program (uploaded as Oven Oilers.rss --- THANKS...
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...