Mitsubishi Fx2n-32mt

My company received a machine with a Mitsubishi FX2N-32MT PLC AND A FX2N-2DA.

I am not familiar with this model. It has been years since I have worked with Mitsubishi and then it was limited.

I will need to combine this machine with some additional equipment.

What software and cables do I need to communicate via a laptop and modify the program?

Are there any downloadable manuals for this PLC and software?

Is this model of PLC capable of password protection?

The required software is Melsec GX Developer Fx

The required cable is an SC-09 which is a serial 9-pin with in-line RS422 converter and Fx DIN adapter attached. If you only have USB ports on your PC then you will also require a USB-serial adapter.

Go to the Mitsubishi web-site for manual downloads. www.meau.com

Try http://www.meau.com/functions/dms/getfile.asp?ID=010000000000000001000000211602000

As for password protection, I'm not sure, quite likely.

thanks Silva.foxx.
I had only worked with "Medoc".
I was hoping something better was available for Mitsubishi.
I will get with a supplier today.