Hello, I am very new to PLCs and I need some help. I have an existing network of 5 SLC 5/03 CPUs which are attached (daisy chained) to 5 1747-AICs. I am wanting to hook up 1 PC to this network. The PC does not have a serial port just USB ports. What would be the best way to hook this up. Thank you.
Help hooking up PC to existing network.
- Thread starter SnakeEyes
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
Easy.
You need a 1747-UIC. This is a USB/DH485 converter.
It will plug into the Peripheral port on one of the 1747-AIC isolators and allow your PC access to any of the SLC-5/03 controllers.
This document has a good diagram of the wiring:
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1747-in062_-mu-p.pdf
You need a 1747-UIC. This is a USB/DH485 converter.
It will plug into the Peripheral port on one of the 1747-AIC isolators and allow your PC access to any of the SLC-5/03 controllers.
This document has a good diagram of the wiring:
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1747-in062_-mu-p.pdf
Similar Topics
HOW to communicate with OPTIX and Mitsubishi's Q Series PLC?? PLEASE HELP ME
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Hi all
I need help on this
As in my project used Schneider TM241 controller.
Now I want to communicate Elite energy meter with controller by...
Hi all,
I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Good day all! Can someone help me with the procedure to update Beijers E700 firmware? The Panel I am working on is firmware 2.04v and I would...