Siemens op 25
- Thread starter homertx
- Start date
Hi homer,
in order to load the application onto a newer OP you need the original Protool application file.
It is not possible by uplading from the panel and then loading onto a panel of different type.
In Protool, the application has to be "converted" to the other panel.
By the way, do not get an OP27, it has been discontinued as well. You should select an OP270-6, this is the latest model that resembles the OP25 the most.
in order to load the application onto a newer OP you need the original Protool application file.
It is not possible by uplading from the panel and then loading onto a panel of different type.
In Protool, the application has to be "converted" to the other panel.
By the way, do not get an OP27, it has been discontinued as well. You should select an OP270-6, this is the latest model that resembles the OP25 the most.
Similar Topics
Hi everyone hope you'll well.
Is it possible for me to download a Crack version of tia portal v13..sorry to say this but the software is very...
I have established an online connection to a machine using an S314 processor.
I am using an mpi connector and simatic manager.
The online...
Hi everyone,
i have a Siemens S7-300 Cpu 314C-2 DP with several cards of i/o and servos
my laptop has TIA version 16 and 17 loaded and...
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...
Good morning fellow sea captains and wizards,
I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...