Can anyone please tell me if I can use a Immediate Input with Mask instruction (IIM) at a hi speed counter 1746-HSCE input word I:e.1 (acc. count)??? If this is not going to work, maybe somebody can help me with how I can immediate read the value of the hi speed counter. Thanks
1746-HSCE Immediate input with mask
- Thread starter feike2
- Start date
OkiePC
Lifetime Supporting Member
This will work as long as it's a local card. (in the same rack with the processor)
PC
PC
Similar Topics
I had a 1746-HSCE go suspected bad. have to swap the card in the morning. Other than dip switch settings is there any configuration to do?
Hi there,
I have a machine where was a servo with extra encoder. That encoder had resolution 100ppr/5V. We did replace complet servopack (...
I have a SLC 5/05 processor and I am trying to reference an output from a High speed counter card to be used elsewhere in the PLC. The output...
I am upgrading HSC modules and have some questions. I can't attach the manuals for reference as they are too large.
1746-HSCE uses M0:e.1/4 for a...
Processor Error Message:
G file configuration error.. user program G file size exceeds capacity of the module.
I cannot seem to find any data...