String (ascii) Block Transfer

vocalmind

Member
Join Date
May 2005
Posts
4
Hi,

Im new here, Im trying to configure panelview 900 with panelbuilder32 to display TEXT (ascii) from ST9:0. from SLC 5/04. Here's my query.

1. block tranfer - can I just use COPY the ST9:0 to M0:1.2710 (word 27)? How many length?

2. how to display the text on my panelview?

3. On my terminal settings block transfer can I use the ST9:0 as a WRITE mode

Hope my query is clear.

Regards
 

Similar Topics

I have a Horner PLC that is reading Ascii string from a device. When the device responds, it responds with the hex value in Ascii. I need to...
Replies
8
Views
2,327
HI Guys So i am trying to write a real SINt or DINT value into a string tag. If in string browser I write it manually, no problem. But how can I...
Replies
8
Views
5,712
Have an unusual one here, guys... I have a remote machine that is sending my 1769-L33ER five 16-bit integers that represent 10 ASCII characters...
Replies
4
Views
2,165
Hello gentlemen, A few days ago I was tasked with converting an old panelview 1400e to a panelview plus 7 application. Everything went well except...
Replies
1
Views
1,296
hi, i try to capture barcode data using UDT with SINT ascii array. i have all the data i need but it in array format, how can i convert to 1...
Replies
5
Views
3,016
Back
Top Bottom