whats this?

Hi there i have a program where i wanted an output to come on after 10 seconds then go off again after another 10 seconds I was using someting (dont know if its a counter or timer!!) M474 and M475

, I want to be able to use more of these can anyone tell me what is the range of M... that I can use. (if ucant understand what im saying please tell me) I mean theres a M474,M475, IS THERE A M476, M478 ETC, If so what do they go up to?

Thanks

Hello Buddha;

It would help if you were to tell us what hardware/software you were using.

I am using the PLC Mitsubishi F series and simple lamps and switches are used to represent the ourputs.

If it won't cause you all kinds of pain and grief to consider doing so...
...you really should get your hands on the manual.

Didn't the pointer from monkeyhead give you any help?

Hi Buddha.


What type of F-serie are you using??

The FX0 have from M0-M512, 63 Timers and 32 counters
The FX1N have from M0-M1535, 256 Timers and 235 counters
The FX2N(C) have from M0-M3071, 256 Timers and 235 counters

But if you have the old version of mitsubishi F1 or so, please let me know.

Dariusch

I dont know woud you be able to tell me if i tell you something from a paper ive got, here goes:
LD X401, RST C460, LD X402, OUT C460,K5,
LD C460 OUT Y431


HOPE THAT TELLS YOU.