Program info

agrippa

Member
Join Date
Nov 2002
Location
Indiana
Posts
7
In the allen bradley programs what do the numbers mean under the bit?
what does the move control do.
Is there a good book out there that can explain all the controls?
 
AB program instructions

You should contact your nearest Allen-Bradley distributor and request the SLC500 Instruction Set manual. The publication number is 1747-RM001C-EN-P Sept. 2001. Or, go to AB.com and click on manuals online, click on control processors, click on SLC500 programmable controllers and then find the pub number and right click on that and save it to your hard drive. If you use dial-up ISP, then take a trip to town or go to a movie cause the manual is a 6.5 meg download. If you have DSL or other high speed ISP, you are in luck and will only have to invest a few mins in the download. This maunal will explain every thing you need to know about the AB SLC and MicroLogix family of PLCs.
Randy L.
 

Similar Topics

Hi everyone, I want to upload the program from my CPU317TF-2 DP to my PC via connecting to CP 343-1 Advanced since it has LAN ports and the CPU...
Replies
1
Views
83
Hello everyone. I am new when it comes to Omron PLCs. Currently I'm uploading program from CJ1M PLC using CS1W-CIF31 cable only. I connected the...
Replies
2
Views
91
Hello, all, total noob here hoping for a little guidance. I bought a new piece of printing equipment that has a Mitsubishi PLC and this Data...
Replies
7
Views
131
Hi there! This is something so old and having machine with it....... Last time unit was powered around 3yr ago and it did not work since than...
Replies
5
Views
183
Hi Deal All I had a issue With Rockwell Software try to download HMI but always give error (Unable to the Load Application) then rest the PC but...
Replies
0
Views
97
Back
Top Bottom