hungnt
Guest
H
I have an S7-200 connect to computer through PC/PPI, I have wincc installed on my computer.
What do I need to connect WinCC to S7-200.
What do I need to connect WinCC to S7-200.
Hello hungnt;
Here is one solution from Siemens for connection over PPI of a S7-200 and WinCC:
More info for the OPC server can be found on this link:
http://support.automation.siemens.com/-snm-0135109872-1116758784-0000032319-0000007507-1118304767-enm-WW/llisapi.dll?query=S7-200+OPC&func=cslib.cssearch&content=skm%2Fmain.asp&lang=en&siteid=cseus&objaction=cssearch&searchinprim=0&nodeid0=4000024
Hope this helps,
Daniel Chartier
Here is one solution from Siemens for connection over PPI of a S7-200 and WinCC:
More info for the OPC server can be found on this link:
http://support.automation.siemens.com/-snm-0135109872-1116758784-0000032319-0000007507-1118304767-enm-WW/llisapi.dll?query=S7-200+OPC&func=cslib.cssearch&content=skm%2Fmain.asp&lang=en&siteid=cseus&objaction=cssearch&searchinprim=0&nodeid0=4000024
Hope this helps,
Daniel Chartier
Similar Topics
Hi
Complete newcomer to S7 so go easy on me...
Siemens S7: What cable do I need to connect S7-1200 PLC to HMI?
The touch screen is one of these...
Hello,
I am very new to Siemens but have been doing AB for many years. I don't have the information I probably need but here's the story. I have...
START FROM ZERO. I had a sharpening machine using S7-200 CN. I don't have PG or software or communication cables. What is the software/cable to...
Hello;
i'm having some troubles with a com test i'm handling.
i have another end for it, but for now i would like to have :
M241 in io_scanning...
Had an issue with the machine cutting stopping in the middle of auto running. So I go to the cabinet to plug up to the plc and well both of the...