Stepper Motor Control w/ Omron CJ1M CPU22

garagon · Jul 11, 2005

Hi everyone,
I would like to know if there are any sample ladder programs to help me with a project to control an X-Y table with stepper motors using a Omron CJ1M CPU 22. The stepper motors have encoders attached to them and are going to be controlled by MCG stepper drives driven by pulses generated from the PLC (hopefully!). Any help will be greatly appreciated. Thanks!

Gary

BITS N BYTES · Jul 11, 2005

garagon said:
Hi everyone,
I would like to know if there are any sample ladder programs to help me with a project to control an X-Y table with stepper motors using a Omron CJ1M CPU 22. The stepper motors have encoders attached to them and are going to be controlled by MCG stepper drives driven by pulses generated from the PLC (hopefully!). Any help will be greatly appreciated. Thanks!

Gary

Gary,
I don't have code, but this description for the CJ1M on MRPLC.com is really great.

http://forum.mrplc.com/index.php?act=Downloads&CODE=02&id=268

Hope this helps.

garagon · Jul 12, 2005

BITS N BYTES,
Thanks, this is really good info.
Gary

Stepper Motor Control w/ Omron CJ1M CPU22

garagon

Member

BITS N BYTES

Lifetime Supporting Member

garagon

Member

Similar Topics