Alan Case
Lifetime Supporting Member
Hi, What I am trying to do sshould be simple. I have connected a prox to the first input of a micrologix 1500 and wish to read the switch count into the HSC. The input works but I am not getting an accumulation in the HSC ACC word. The high and low presets are at the max and I have written 1 to the CE (count enabled) bit but still no go. Is there some secret handshake deal that I am not aware of.
I have the mode set at zero which should be count up.
Regards Alan Case
I have the mode set at zero which should be count up.
Regards Alan Case