allen bradley powerflex 4 drive
- Thread starter bassboy73
- Start date
jstolaruk
Lifetime Supporting Member
Your question doesn't make sense to me but the part number you cited accepts 480V input @ 6 amp and will drive up to a 480V 3hp motor. Anything bigger than that you'll have to move to the Powerflex 40 series.
mgvol
Member
If you mean you can't change the Motor Nameplate Volts (P031) above 240 and the drive is a 22A-D (460 V), then I would call your distributor. Either the drive is defective or it is a mislabeled 22A-B drive.
Similar Topics
Got this new to me powered on today and have no main air and the only problem I have found is the f059 on the vfd. S1 has 24v, none on S2, and 48v...
Greetings everyone,
I know there is a way to programmatically set the date/time on a 750 series VFD (look up Rockwell automation sample code)...
Can someone do me a huge favor and print these 2 Allen Bradley DNO files and email them to me?
[email protected]...
Hi all,
Client with a pretty much brand new AB Powerflex VFD starting throwing Fault 17: Input Phase Loss this afternoon. Started doing some...
We have a Powerflex 753 drive on a 192.168.1.X network that I can communicate with a Controllogix L71 with no issues on same network...