Help in tryin to setup connection btw plc n com

cue_ball

Member
C
Join Date
Jul 2005
Location
spore
Posts
15
Hi guys..

i hold a fp2sh from matsushita.. and im using a et-lan ver2.3 also from matsushita..

i need to create a program using VB c++ inorder to communcation with my plc.. I guess the first thing is to settle the communcation setting with my plc..

So any help guess..

no rounter is use just a normal direction connection to my plc..

How should i go about settle it up?
 

Similar Topics

C
Panelview Plus 7 Help
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
3
Views
99
patrickmoneyy
P
P
Help w/ Proficy Machine Edition - GE Versamax Controller (Student License)
Hi Everyone, I own a GE Versamax controller that I purchased for a class at Long Beach City College a couple of years ago. I lost the use of my...
Replies
7
Views
114
Steve Bailey
Steve Bailey
A
need help
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Replies
2
Views
150
adam 1432
A
D
Cimplicity Workbench Help
Hello, I am working with cimplicity workbench, I have made changes to the current project from this machine I am using in the past. However when...
Replies
0
Views
49
Dylan Beg
D
S
Structured text beginner - help a brother out
Hello, doing switch from FBD to ST. First task is converting my old work. How do you sum variables? For example, Interlock1, interlocl2 and...
Replies
5
Views
191
drbitboy
drbitboy
Back
Top Bottom