Quick question about SQO and SQI

bioplc

Member
B
Join Date
Jul 2005
Location
tampa
Posts
97
Hello All,

It will be great help if anybody tell me about SQO and SQI use and where and how they should be used. A real time example is really appreciated.

Thanks in Advance
 

Similar Topics

T
Need quick help with networking question
So the quick and short of the situation is that I designed an axle press that was sent to one of my company's other facilities. That facility just...
2
Replies
19
Views
4,217
kalabdel
K
E
Quick AB PID Question (RSLogix 5000)
So I have a PID loop on an 1756-L61 running V17 software just for background. Also the PID PV is a pressure transmitter and the CV is speed sent...
Replies
1
Views
893
Mispeld
M
CENTER
Quick Question
Has anyone come across a 3 turn potentiometer that is panal mounted with either a 22 or 30 mm hole? I have been looking but nothing so far. They...
2
Replies
20
Views
4,674
GaryS
G
M
CCW quick question about Version number.
Hi, I am just learning CCW, finally got connected to a micro820. I'm wondering what the Version number means. The program that was already in the...
Replies
1
Views
1,616
jholm90
J
S
Quick Question about pulse outputs
How do I measure if I am getting a signal out of the plc output? All of the outputs are giving me the same voltage, however I am certain that not...
Replies
6
Views
2,165
drbitboy
drbitboy
Back
Top Bottom