- We are using honey well DCS.our system topology is we had redundant processors c200 & then Remote I/O cards.Uplink & Downlink both is on Controlnet.For viewing & control we have redundant dell servers & 3 dell workstations.Every thing is fine at low level i mean when primary Dell server goes down then Backup automatically becomes primary & dell stations dont have any affet .They start taking Data through New Primary server as we had made 4 sation.ini files.Any change which we make on display builder through any primary sever is automatically copied to backupserver as well.
When i go to station software then to file replication status is as under.
Abstract
Views
Mapping
above three replications are ok
I dont know how to replicate controlbuilder files
2. When primary dell server goes down its station softwatre quits.i had move two linces of station softwares for both servers through quick bulider & assign different station no's to both stations for redundant servers. But in the server running on primary is possible to open station software.Is it possible to run station software on both primary & backup redundant servers.
Any one ,help me in detail
Thanks in advance
Post IconsYou may choose an icon for your message from the following list:
No icon