WallyPrestone
Member
What is the cable to hook up SLC5/05 to PC
SLC500 Allen Bradley
SLC500 Allen Bradley
Hookup SLC500 SLC5/05 with PC
- Thread starter WallyPrestone
- Start date
Ron Beaufort
Lifetime Supporting Member
which port Wally? ... the top one (Ethernet?) ... or the bottom one? (RS-232) ...
WallyPrestone
Member
OP
Ron,
Thanks for the quick reply
How can I use the ENET port
Can I use the CAT5 and how to setup the RS Link ( which driver)
Sorry I am new in PLC
Thanks Ron
Wally
Thanks for the quick reply
How can I use the ENET port
Can I use the CAT5 and how to setup the RS Link ( which driver)
Sorry I am new in PLC
Thanks Ron
Wally
Similar Topics
Hi all,
This company has a monorail conveyor running thru their plant. Powder coat factory.
Recently installed was a ML1100, PF525 and a...
Hi Friends,
I'm wanting to install a PLC with a GPS module on a piece of landscape sprayer equipment. The sprayer will be used outdoors and has a...
I have a micrologix 1000 that I would like to connect with a
panelview for graphics. What do I need for this connect as far
as cables and...
:tod: I have a PowerFlex70 5HP VFD and want to hook up the digital inputs as Sink inputs. The User Manual states that you can use Sink or Source...
Hello to all,
my name is nagaraj from Bangalore,
Actuall i have a RTD PT100 2 wire type and it is fixed 30 meter away from the PLC panel,So...