GE battery

Good day all... this is my first post here. I'm new also to maintaining PLC's and have a lot to learn. Where I'm working I've basically been tossed into the river, and I'll either sink or swim.
One of the problems I've been faced with involves an older PLC, a GE Fanuc series one. The lithium backup battery is bad or going bad and I need to find a replacement soon. It's part number IC610ACC150, but my local dealer has not been able to cross reference this part number. Can anyone suggest a link, source or cross?
Greg

try a company called Qualitrol they may have a source

Let's see... A quick Google search for IC610ACC150 gives THIS link, which states that the same battery is also used in the DL305 and 405, which means you can get one HERE for US$15...



-Eric

The ONLY difference between a Series 1 battery and any 3.5 volt Lithium battery is size and the connector on the peg-tail. In a pinch it is very easy to get the battery from Batteries-Plus and recycle the connector.
Just do not leave the battery unplugged too long or you will need to re-load the program. If my memory is good today, you have about 5 minutes of capacitance in most CPUs.

Try

http://www.mdsbattery.com/shop/productprofile.asp?ProductGroupID=1435&Brand=GE%20Fanuc&DepartmentName=PLC%20Batteries&DepartmentID=180

for series one battery

for all plcs try

http://www.mdsbattery.com/departments/department001.asp?Brand=GE%20Fanuc&DepartmentName=PLC%20Batteries&DepartmentID=180

I have used there .co.uk counterpart and can only 100% recommend them as being excellent