Rob D.
Member
Does anyone know what the differences are between AB's 1747-c10 and 1747-c11? The pinouts and connectors look exactly the same to me (I don't have both in front of me), so I'm assuming that one is just a longer cable?
DH485 Cables
- Thread starter Rob D.
- Start date
rdrast
Lifetime Supporting Member
No difference, except one is 1 foot, one is 6 feet.
Similar Topics
Hello all,
i have seen a few things here and there about connecting to a panelview 550, however i still would like to ask a few things,
I have...
Hi all,
I had a setup with 2 Micrologix 1100 connected to a Panelview C300 over DH-485. I was mandated to upgrade the HMI, and proposed to...
Hello,
We have an older machine that has a standard PanelView (2711-T10C3) connected over DH485 to a SLC 5/04 PLC via a 1761-NET-AIC module in...
Hi,
I have a SLC5/03 connected to a working HMI via RE232 port, and connected to a broken HMI via DH485 (RJ45), I want to use the cable that used...
Hey all, long time reader but first time poster here. I've been tasked with an odd one and was wondering if anyone else had experience in this...